EasyManuals Logo
Home>InFocus>Projector>LP130

InFocus LP130 Software Setup Guide

InFocus LP130
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Windows XP USB setup
Windows 2000 automatically detects and installs USB drivers for the keyboard, mouse and composite
device. You need only to follow the Found New Hardware Wizard to complete the driver installation
process. It starts automatically when Windows 2000 detects a new hardware device.
Store the file you download your computer's hard drive or on a floppy disk. You'll need access to it when
you set up the computer for use with the projector.
Note that you need to install the driver once on each laptop or desktop PC you use with the projector.
To install the InFocus USB Projector Control Drivers for Windows 2000
When you plug the USB cable into the USB connector on the computer, the Found New Hardware dialog
box appears.
NOTE The illustrations below refer to the LP130. The dialog boxes you see will refer to your projector
model. Otherwise the procedure is the same.
1 In the Found New Hardware Wizard, click Next.

Other manuals for InFocus LP130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus LP130 and is the answer not in the manual?

InFocus LP130 Specifications

Projection Distances and Image Sizes IconProjection Distances and Image Sizes
projection distance 5 feet1.52 m
min image size at 5 feet0.90 m
max image size at 5 feet1.10 m
projection distance 8 feet2.44 m
min image size at 8 feet1.44 m
max image size at 8 feet1.76 m
projection distance 12 feet3.66 m
min image size at 12 feet2.16 m
max image size at 12 feet2.63 m
projection distance 16 feet4.88 m
min image size at 16 feet2.88 m
max image size at 16 feet3.51 m
projection distance 20 feet6.10 m
min image size at 20 feet3.60 m
max image size at 20 feet4.39 m
projection distance 30 feet9.14 m
min image size at 30 feet5.39 m
max image size at 30 feet6.58 m
Display and Image IconDisplay and Image
display technologyDLP from Texas Instruments
native resolution1024 x 768
brightness1100 ANSI lumens
contrast ratio400:1 full on full off
aspect ratio4:3
displayable color palette16.7 million colors
Lens and Projection IconLens and Projection
projection lens zoom ratio1.22:1
projection ratio wide0.72:1
projection ratio narrow0.59:1
projection offset111.3% typical
digital keystone correction+/- 20˚
Power and Consumption IconPower and Consumption
light source120 Watt UHP+
lamp life2000 hours
power supply100-120V, 200-240V at 50Hz-60 Hz
power consumption150 Watts
Weight and Dimensions IconWeight and Dimensions
dimensions6.68" x 8.63" x 2.0" (170mm x 219mm x 51mm)
weight3 lbs (1.36 kg)
operational noise37dB

Related product manuals