InFocus LP130 Software Installation

Windows XP USB Download and Installation
When you plug the computer cable into the VESA connector on a computer, Windows XP automatically detects and installs USB
drivers for the keyboard and composite device. It is only when you plug in the USB cable so you can use the LP130 remote
control to emulate the Page Up and Page Down keys on the computer that you need to install the Windows XP drivers. You
need only to follow the Found New Hardware Wizard to complete the driver installation process. It starts automatically when
Windows XP you plug in the USB cable.
Store the file you download your computer's hard drive or on a floppy disk. You'll need access to it when you set up the
computer for use with the LP130.
Note that you need to install the driver once on each laptop or desktop PC you use with the LP130.
NOTE The file you download is called ProjMgr-v1x-Drvrs.exe. This file serves as an upgrade for the Projector Manager
application and as the source for USB drivers for Windows XP. The download and installation procedure is the same for both.
You do not need to install Projector Manager to have USB connectivity. However, if you already use Projector Manager, you
need to install the drivers so that you can use it with Windows XP.
To download the Windows XP USB drivers
1. In the Software Download page
, click the Download Now button next to the Windows XP USB
Drivers.
The File Download dialog box appears.
NOTE By default the File Download dialog box includes a message warning you that you are about to download a
potentially damaging file. You can ignore this message.
2. Click Save.
The Save As dialog box appears.
3. Navigate to the location where you want to save the file, then click Save.

InFocus LP130 Specifications

Projection Distances and Image Sizes

projection distance 5 feet	1.52 m
min image size at 5 feet	0.90 m
max image size at 5 feet	1.10 m
projection distance 8 feet	2.44 m
min image size at 8 feet	1.44 m
max image size at 8 feet	1.76 m
projection distance 12 feet	3.66 m
min image size at 12 feet	2.16 m
max image size at 12 feet	2.63 m
projection distance 16 feet	4.88 m
min image size at 16 feet	2.88 m
max image size at 16 feet	3.51 m
projection distance 20 feet	6.10 m
min image size at 20 feet	3.60 m
max image size at 20 feet	4.39 m
projection distance 30 feet	9.14 m
min image size at 30 feet	5.39 m
max image size at 30 feet	6.58 m

Display and Image

display technology	DLP from Texas Instruments
native resolution	1024 x 768
brightness	1100 ANSI lumens
contrast ratio	400:1 full on full off
aspect ratio	4:3
displayable color palette	16.7 million colors

Lens and Projection

projection lens zoom ratio	1.22:1
projection ratio wide	0.72:1
projection ratio narrow	0.59:1
projection offset	111.3% typical
digital keystone correction	+/- 20˚

Power and Consumption

light source	120 Watt UHP+
lamp life	2000 hours
power supply	100-120V, 200-240V at 50Hz-60 Hz
power consumption	150 Watts

Weight and Dimensions

dimensions	6.68" x 8.63" x 2.0" (170mm x 219mm x 51mm)
weight	3 lbs (1.36 kg)
operational noise	37dB