19
Color
The color setting adjusts a video image from black and white to
fully saturated color.
•
Press the left mouse button to decrease the amount of color in
the image.
•
Press the right mouse button to increase the amount of color in
the image.
Blank Screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby. Click either
mouse button to toggle between the blue and black options.
Reset All
Click either mouse button to reset all the options (except Lan-
guage, Video Standard, Ceiling and Rear Projection, and Standby
Time) in all the menus to their original settings. This also returns
Freeze and Mute to their default (off) settings.
To Next Page
Loading...
Need help?
General
