"XX-XX-XXXX"
Shows system date in dd-mm-yyyy format
Push ENTER to switch between day, month, year, hour, minute and
second. Then, use arrows to configure
TIME =
"XX-XX-XX"
Shows system time in hh-mm-ss format
Use date submenu to set time
EVENTS MENU
EVENTS (xxx)
Shows last 380 events (alarms) of system. (xxx) shows events count. To
look event details, you must press ENTER key in current position and
use UP/DOWN keys.
CLEAR EVENTS
Clears all events stored in eeprom after verification of clear process.
EVENTS (xxx) SUB MENU
YYY : AAAAAAAAAAAA
“YYY” Shows order number of event and “AAAAA-A” shows event
description. (For events descriptions see ALARM DEFINITIONS on
page 17). Events stored in eeprom using FIFO method. Order number
of last occurred event is 001. To look event details, you must press
ENTER key in current position and use UP/DOWN keys.
DATE = XX/XX/XXXX
Displays date of event occurring.
TIME = XX:XX:XX
Displays time of event occurring.
A:XXXX-XXXX-XXXX
Displays alarm status when event is occurred.
ST=XXXX-XXXXXXXX
Displays status string when event is occurred.
IDENTIFICATION MENU
"X/X XXX kVA"
Shows number of input/output phases and output nominal apparent power
FW =
"XX"
Shows firmware version
4th1.4 Buzzer
Buzzer warns the user about the present alarms. It can be disabled by using the commands menu
BUZZER
STATE DEFINITION
Off No alarms
Discontinuous A minor alarm is present
Steady A major alarm is present
To Next Page
Loading...
Need help?
General
