Infortrend EonStor DS 3000 Series - Page 31

2-4 Chapter 2: Hardware installation
Slide rail kit contents
Check your slide rail kit for the following contents.
Installing the enclosure to the rack ear mount
To install the enclosure to the rack ear mount, this requires an assistance of another person. While the
other person holds the enclosure at the installation height, the other person secures the enclosure using
four 25 mm M5 screws at the front and eight no. 6-32 screws on the side panels, four on each side.
No. 6-32 mm
25 mm M5
25 mm M6 25.4 mm No. 10-32
1 x Mounting bracket
assembly, left side
1 x Mounting bracket
assembly, right side
11
11
11
11
11
8 x 9.0 mm M5 Truss
head screws
11
11
11
4 x M5 cage nuts
4 x 25 mm M5 screws
4 x 25 mm M6 screws
4 x 25.4 mm No. 10-32
screws
2 x Inner glides
11
8 x Hexagon washer
screws, No. 6-32 mm