Need help?Do you have a question about the Infortrend DS 3024UB and is the answer not in the manual?
General| Model | DS 3024UB |
|---|---|
| Category | Storage |
| Drive Bays | 24 |
| Hot-swap Support | Yes |
| Supported Drives | 2.5-inch SAS/SATA HDD/SSD |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Power Supply | Redundant |
| Cooling | Redundant fans |
| Cache Memory | 4GB |
| Form Factor | 2U Rackmount |
Precautions regarding hazardous energy in the equipment chassis and access control.
Overview of key hardware specifications like form factor, controller, memory, and ports.
Details front panel components like buttons, drive trays, handles, and rackmount holes.
Explains rear panel I/O interfaces and LEDs on controller modules.
Details controller interface, LEDs, super capacitor, and USB ports on the rear panel.
Details the front panel buttons, LEDs, and LCD for system status and configuration.
Explains the function and status of front panel LEDs and buttons.
Lists requirements before installation, like environment, component check, drives, memory, cables, and rackmount.
Details on installing the rack mounting kit, including tools and procedures.
Step-by-step guide to assembling the rack ear mount kit.
Instructions for mounting the enclosure to the rack ear mount, requiring assistance.
Step-by-step instructions for assembling and installing the slide rail kit.
Guidance on lifting and inserting the enclosure onto the slide rail.
Steps for setting up fibre cabling, including SFP module installation.
Description and color codes for front panel LEDs (Power, Busy, Attention).
Explains the LEDs on the drive trays (Drive Busy, Power status).
Detailed explanation of controller module LEDs (Cache Dirty, Host Busy, etc.).
Explains the LED status for PSU and cooling modules.
Lists replaceable components like PSU modules and hard disk drives.
Step-by-step guide for replacing a PSU or cooling module.
Instructions for identifying and replacing a faulty hard drive.
Procedures for replacing a controller module, including firmware matching and shutdown.
Steps to replace or upgrade DRAM modules on the controller.
Instructions and precautions for replacing CBM components, specifically the super capacitor.
Steps to replace the FBM component on the controller.
Instructions for replacing or adding a host board to the controller.
To Next Page