Need help?Do you have a question about the Infortrend DS1012R2C000D-SFP and is the answer not in the manual?
General| Model | DS1012R2C000D-SFP |
|---|---|
| Category | Storage |
| Form Factor | 2U |
| Drive Bays | 12 |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Cooling | Hot-swappable fans |
| Controller | Dual Active-Active Controllers |
| Drive Type | SAS/SATA |
| Host Interface | iSCSI, Fibre Channel |
| Network Ports | 2 x 10GbE (SFP+) |
| Power Supply | Dual redundant power supplies |
| Dimensions (HxWxD) | 88 x 482 x 600 mm |
Provides support channels and contact details for different regions.
Provides instructions for safe installation and operation of the system.
Lists requirements before starting hardware installation.
Guides on how to install hard drives into the system.
Introduces the EonStor DS 1000 Gen2 systems and their capabilities.
Details the controller's components and interface options.
Discusses factors for making connections and designing topologies.
Pre-power on checklist for system components.
Step-by-step guide to power on the system and related devices.
Steps to safely power down the system.
Lists features for monitoring system operation and status.
Procedures for replacing controller modules.
Steps to replace the DRAM module.
Procedures for replacing the Cache Backup Module.
Steps to replace a Power Supply Unit.
Step-by-step guide to replace a hard drive.
Lists detailed technical specifications of the system.
To Next Page