24
Drive Tray Bezel
The drive tray is designed to accommodate separately purchased SAS, NL-SAS or
SATA interface hard disk drives. There is a rotary bezel lock (1) that secures the drive
tray in chassis, while a release button (2) can be used when retrieving disk drives
from the chassis. To the right of the bezel plate, there is a drive busy LED (3) and a
power status LED (4).
Drive bay arrangements are numbered from left to right, from top to bottom.
WARNING
Be careful not to warp, twist, or contort the drive tray in any way (e.g., by dropping it
or resting heavy objects on it). If the drive bay superstructure is deformed or altered,
the drive trays may not fit into the drive bay.
To Next Page
Loading...
