Infortrend DS1012R2C000D-SFP - Introduction; Product Overview

EonStor DS 1000 Gen2 Series
13
Introduction
Product Overview
This manual introduces EonStor DS 1000 Gen2 systems that support 6Gbps,
12Gbps SAS or 6Gbps (SATA-III) drive interfaces. The 2U / 3U / 4U enclosure is
designed to utilize 2.5” or 3.5” hard drives. Drive capacity can be expanded by
attaching hard drive expansion enclosures.
Model Naming Conventions
The naming rules for storage systems and expansion enclosure models are
explained in the example below:
DS1024R2B  DS
(A)
+ 10
(B)
+ 24
(C)
+ R
(D)
+ 2
(E)
+ L
(F)
+ B
(G)
Designation
Description
(A)
DS = EonStorDS systems
JB = Expansion enclosures
(B)
10 where 0 indicates first generation, 1 indicates second generation and so on
(C)
12 = 2U system, 12 hard drives capable
16 = 3U system, 16 hard drives capable
24 = 2U / 4U systems, 24 hard drives capable
(D)
R = Redundant (dual) controllers
G = Single and NOT upgradeable to dual controllers
(E)
2 = Gen2 Models
(F)
L = Models with BBU
C = Models with super capacitor
Without any CBM if not mentioned
(G)
B = 2.5” hard drive form factor system
3.5” hard drive form factor system if not mentioned