Need help?Do you have a question about the Infortrend S12F-G1842 and is the answer not in the manual?
General| Model | S12F-G1842 |
|---|---|
| Category | Storage |
| Form Factor | 2U |
| Drive Bays | 12 |
| Processor | Intel Xeon |
| Drive Type | SAS/SATA |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Power Supply | Dual redundant power supplies |
| Controller | Dual-active controller |
Guidelines for installing and operating the EonStor DS RAID system and JBODs.
Describes the RAID controller, its memory, and the CBM methodology.
Explains the JBOD controller, data distribution, and SAS interface.
Instructions on how to upgrade a single-controller system to a dual-controller configuration.
Identifies and describes the ports and indicators on RAID controller modules.
Explains the host port types for different Fibre-Host RAID models.
Describes the system's firmware and the SANWatch management software.
Explains how audible alarms are triggered and managed for system failures.
Lists requirements for hardware installation, including environment and component checks.
Factors to consider when purchasing and preparing hard drives for installation.
Steps for safely removing a RAID controller module from the chassis.
Step-by-step guide for installing the Battery Backup Unit (BBU) in Type I controllers.
Factors to consider when selecting drives, calculating performance, and connecting the system.
Primary concerns and recommendations for configuring host-side connection topologies.
Details connections for a single hybrid unit to FC and iSCSI hosts for optimal performance.
To Next Page