2-6 Chapter 2: Hardware installation
4. With the assistance of another person, lift and insert the enclosure onto the slide rail. Ensure that
the inner glides on both sides of the enclosure meet the inner glide rail.
25 m m M 5 or 25 mm M6 or 25.4 mm No. 10-32
UNL OCK
UNL OCK U NLOCK
5. Secure the enclosure using the M5, M6, or no. 10-32 screws on the front.
When the enclosure is already assembled to the cabinet, you can proceed to the next installation
procedures of other components.
To Next Page
Loading...
