INFOSEC UPS SYSTEM E3 Performance 3000 RT User Manual

INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 06 17 AA 59 205 05

 Step 4
 Step 5
 Step 6
Remove the top cover of
battery box and replace the
inside batteries.
After replacing the
batteries, put the battery
box back to original
location and screw it
tightly.
Re-connect the battery wires.
 Step 7
Put the front panel back to the unit.
2-6 Battery Kit Assembly (option)
NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
2.6.1 – 2 battery kit
Step 1: Remove adhesive tapes.
Step 2: Connect all battery terminals by
following below chart.
Step 3: Put assembled battery packs on
one side of plastic shells and insert one
more defect battery on the space.
Step 4: Cover the other side of plastic shell
as below chart. Then, battery kit is assembly
well.
Tapes

INFOSEC UPS SYSTEM E3 Performance 3000 RT Specifications

General

Brand	INFOSEC UPS SYSTEM
Model	E3 Performance 3000 RT
Category	UPS
Language	English