Ingenico iWL250 3G - User Manual

Purchase
1.
Pressing the green button
switches the terminal on.
2. The <F> button opens the main menu.
3. Pressing <1> opens the transaction menu. 1: Transactions
4. Push the <1> button. “Purchase” is activated. 1: Purchase
5.
Enter the amount and confirm with
.
When you press 1, the amount is 1 EURO.
Amounts less than “1” have to be preceded by the decimal mark, comma via the “.” key.
<Amount>
6. Depending on the card type, it must be inserted in the chip card reader, held up to the
contactless reader, swipped through the magnetic swipe reader or entered manually after
pressing F4 for PAN key entry.
7. The amount is displayed for the customer to read. When using a card with an associated
PIN, the customer is instructed to enter the PIN code (4 to 6 digits) and confirm
with . When using a card without a PIN, only the amount must be confirmed.
Generally, customers do not need to do anything further for a contactless payment of a
small amount. The transaction can be interrupted by pressing .
Timeout: If a transaction is not concluded within 30 seconds, the process is aborted.
<PIN>
8. Payments are processed and, when appropriate, authorised online.
Chip cards: The card must remain inserted in the chip reader during the transaction
until the instructions appear to remove the card.
9. Receipt is printed out. Please follow the terminal’s instructions: If the customer’s
signature is necessary, please request and check the customer’s signature.
10. To print a copy of the receipt: Push the <1> button.
To not print a copy of the receipt: Push the <2> button.
If no button is pushed, a copy is automatically printed after 30 seconds.
1: Copy
or
2: No copy
Quick user guide for:
Ingenico iWL250 3G
Ingenico iWL250 WIFI
Ingenico ICT220+IPP320

Summary

Purchase

Reversal (Cancellation)

Credit (Refund)

Reservation

Reservation

Process to book an amount on the cardholder card.

Reservation completion

Process to book a reservation amount previously made.

Reservation adjustment

Process to increase the reservation amount.

Additional reference text

Multiple account

Daily closing

Special button

Enquiries and settings

Enquiries (journal)

Use F buttons to get to main menu, select <3> Queries.

Settings

Use F buttons to get to main menu, select <4> Settings.

Eco-mode for power saving

Backlight

Parameter setup in seconds for terminal display and keyboard backlighting.

Standby

Parameter setup in minutes for terminal power off.

Notes about the unit

Further information

Ingenico iWL250 3G Specifications

General

Device Type	Portable Payment Terminal
Dimensions	165 x 78 x 54 mm
Connectivity	3G, Bluetooth
Battery	Li-Ion
Memory	128 MB Flash, 64 MB RAM
Card Readers	Smart card, Magnetic Stripe, Contactless
Printer	Integrated thermal printer
Weight	320g