Ingenico iWL220 BT Series User Manual

IMPORTANT INFORMATION EMV CHIP CARD PROCESSING
This device has the ability to process EMV chip cards. If you are
set up to accept chip cards, you will notice a few dierences.
1. Chip cards must be inserted into the device or pin pad if
attached (swiped transactions are not allowed).
2. The chip card must remain in the device until the transaction
is complete.
3. The transaction may require a customer to enter a PIN
(similar to a debit transaction).
4. Chip card transactions require the credit card to remain in
the the cardholder’s possession at all times.
For more information regarding EMV chip card acceptance and
processing, please visit: www.paymentstart.com/secure
INSTALLATION INSTRUCTIONS
Step 1: Open box
Step 2: Follow installation instructions on page 2
Step 3: Begin processing
CONTACT US:
www.paymentstart.com
for user guides and other DIY tips
1-866-451-4007
Activation & Training
8:30 AM – 9:00 PM ET, M-F
Look for Ingenico NA online
help videos on YouTube –
search for “Out of the box:
iCT200 Series.”
Ingenico iWL220 BT Series Installation Guide
Your
Payment Solutions
Team
DOCUMENT D’EXECUTION
INGENICO_CMJN.ai
INFORMATIONS GENERALESCOULEURS UTILISEES APPROBATION
Client: INGENICO
Date : 10 DEC 2013
Utilisation: Impression quadri.
Ne pas utiliser pour application
écran.
C 67/M 54
J 47/N 43
C 0/M 100
J 100/ N0

Ingenico iWL220 BT Series Specifications

General

Connectivity	Bluetooth
Processor	ARM 9
Dimensions	165 x 78 x 54 mm
Weight	300 g
Card Readers	Magnetic stripe, Smart card
Battery	Li-Ion
Security	PCI PTS certified
Device Type	Portable Payment Terminal
Printing	Thermal printer
Operating System	Proprietary OS
Payment Methods	EMV, magstripe

Summary

EMV Chip Card Processing

Chip Card Transaction Differences

Details differences for chip card processing, including insertion, PIN entry, and cardholder possession.

EMV Processing Information

Further information on EMV chip card acceptance and processing is available online.

Contact and Support

Online Resources

Access user guides and DIY tips at www.paymentstart.com.

Activation and Training Support

Contact 1-866-451-4007 for support Mon-Fri, 8:30 AM - 9:00 PM ET.

Installation Steps

Step 1: Open Box

Begin the installation by opening the product packaging.

Step 2: Follow Page 2 Instructions

Refer to page 2 for detailed installation procedures.

Step 3: Begin Processing

Once installation is complete, start processing transactions.

Base Communication Setup

Establish Communication Connection

Connect the terminal to a router or modem via Ethernet or telephone line.

Charging and Communication Base

Placing Terminal on Base

Place the terminal on the base to charge. 8-12 hours of charging is recommended daily.

Power Connection

Connect Power After Communication

Connect the power supply after establishing the communication connection.

Paper Roll Insertion

Correct Paper Feed

Ensure the paper roll feeds correctly into the printer mechanism as shown.