3
Reservation
In addition to the transactions described above, terminal allows dedicated transaction type for
amount reservation used e.g. by hotel, rental car, ight ticket, other check in services etc.
The operation of these additional functions corresponds to the same logic as that used for the
standard functions.
Terminal allows following reservation transactions:
A <5> Reservation
Transaction type to book amount on the Cardholder card.
B <6> Reservation completion
Transaction type to book a Reservation amount that was previously made.
The entire amount or even just a partial amount can be booked.
C <0> <3> Reservation adjustment
To increase the amount of the reservation.
How to process reservation transactions:
A Reservation
1. Select the transaction type <5> Reservation 5: Reservation
2. Enter the reservation amount. <Reservation amount>
3. Use the card at the terminal or press F4 key to enter manually card PAN,
expiry date and CVV.
u
Keep the terminal receipt, transaction reference number is needed to complete transaction.
B Reservation completion
1. Select the booking type <6> “Purchase reserv.” 6: Purchase reserv.
2. Enter the final transaction amount. <Transaction amount>
3. Enter the original reservation amount. <Reservation amount>
4. Enter the transaction reference number from original reservation receipt. <Reference number>
5. The card does not have to be scanned at the terminal.
u
After this transaction final amount is booked.
C Reservation adjustment
1. Under <0> Other transactions, select the booking type <3> Reserv adjustment 3: Reserv adjustment
2. Enter the new reservation amount by which the underlying reservation is to be increased.
This amount is then authorized.
<New reservation
amount>
3. Enter the transaction reference number from original reservation receipt. <Reference number>
u
Keep the terminal voucher (original transaction ref number is required), this is needed again.
To Next Page
Loading...
Need help?
General
