Ingenico iWL250 - Page 2

Copyright © 2013 Ingenico 20130529 KI_iWL_DIV2248EN.doc
2
/
4
Menu handling / Call of functions
The terminal has different modes like the idle mode or the entry mode. In the idle mode all system informa-
tion regarding battery and signal strength, date and time are displayed on the top of the screen. After 60
seconds without user entry the terminal falls into the idle mode. Pressing any key leads to a change to the
entry mode. In the entry mode a payment can be started or a menu entry can be called.
In the entry mode there are the following options to call menu and functions:
1. Direct access to the menu – press F-key once
2. Direct access of favourites– press 

-key once
3. Direct access of transaction scheme– press 

-key once
4. Access by function code – press F-key twice
1 Payment 9 Extended diagnosis 21 Menu: Bonus card
2 Reversal 10 Menu: transaction scheme 53 Menu: Free
3 Credit 11 Menu: Special transactions 511 Display settings.
4 End of day 12 Menu: TIP 520 Automatically daily cut
5 Daily report 14 Menu: Reservation
521
Change password
7 Copy of last receipt 17 Menu: Remote authorisation 522 System information
Hint:
A List of all available function codes can be printed by using the f
unction 526 (Hotkeys). To do this, start the function as descr
i
bed
above, key in your merchants password and confirm with the OK-key. Stop the following display message by pressing the STOP-
key. A
complete description (German) can be found here: www.ingenico.de.
In the main menu you can use the arrow-keys 

 and 

 to access the
entry, and confirm it using the OK-key. For the sub-menu this works in the
same way.
The menu favourite is called by pressing the key▼ once in the entry
mode. In the usual setup the following three functions can be called:
Reversal – Daily closing – Extented diagnosis
Up to 5 functions can be placed individually by using extended functions.
This function is used to start a certain transaction scheme such as Rever-
sal or Credit. Pressing the ▲-key in the entry mode opens the menu
„Transaction scheme “, you have a choice of the transaction you need.
Entry mode
Status
LED’s for the
contactless reader
Idle mode
Status information
for battery/connction/
date/time
Every function can be called directly by using the fixed function code
which has up to 3 digits. After pressing the F-key twice in the entry mode
you need to enter the function code and confirm with the OK-key.
Most important function codes
An
i
dle
-
logo is
displayed here
Any key
60 seconds without
entry
Please note:
The screens on this page are
examples based on the standard
settings. They vary according to
the specifc settings of the
language and other parameters.
Hints: On the top of the display you can see, in which menu you are
currently and how many options are offered in the menu.
In case you are asked for a password please refer to the next page
Main
Menu
- Transactiontype
- Favourites
- Measures
- Settings
- Added applications
- Last selection
Enter amount
Payment
EUR: _____,__
Please enter amount