1. Plugging in the power supply.
2a. Connecting your terminal through a phoneline.
2b. Installing your terminal through a phoneline.
3a. Connecting your terminal through broadband.
3b. Connecting your terminal to the base.
3c. Installing your terminal through broadband.
Our easy guide will help you get up
and running in no time.
We'll cover:
We’re excited to
have you on board.
iWL252
3
Once it’s plugged in, you’ll be able to connect the
terminal either through your phoneline or broadband.
• To connect using your phoneline, go to page 4-5.
• To connect using your broadband, go to 6-7.
1.
Plugging in the
power supply.
Take the power cable and plug it into the circular port
on the base unit, as shown below.
Power Supply
To Next Page
Loading...
