11
3_4 Installing the terminal on the
base
Place the iWL280 between the anges on its base so that
the contacts of the IWL280 engage on the contacts provided
on the base (see picture below).
Connecting the terminal on the base
Once installed, the base modem is designed to always be
plugged into the mains network and be connected to a
telephone line. The telephone line should not be shared.
Using the modem base (if modem tted on your base)
4_Installation
4_1 Recommendations
Place the base on at surface near an electric socket and according to
the base to the telephone or a Ethernet socket. The terminal should
be placed far from any very hot zones, protected from vibrations,
dust, damp and electromagnetic radiation (computer screen, anti-theft
barrier etc.).
Location of the iWL280
To Next Page
Loading...
