Ingersoll-Rand G 160 User Manual

Users guide and maintenance
manual for the generating sets
Réf. GPAO : 33501168901NE
Model
(
s
)
: G33
Control device : M150
Réf. constructeur : 33501168901
Revised (10-12)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand C
ompany and Doosan
Company or the products of
e
ith
er.

Ingersoll-Rand G 160 Specifications

General

Brand	Ingersoll-Rand
Model	G 160
Category	Portable Generator
Language	English

Summary

Preamble

Pictograms and their meanings

Explains warning symbols used throughout the manual for safety.

Safety instructions and regulations

Details safety precautions, hazards, and regulatory compliance.

Installation

Unloading

Procedures and safety for unloading the generating set.

Road trailer

Trailer linkage

Correct procedure for hitching a trailer to a tow vehicle.

Battery maintenance

Operation

Pre-start inspection

Guides pre-start checks like bolts, fluids, and components.

Starting the engine

Instructions for starting the engine, with or without glow timer.

Starting the load

Stopping the engine

Instructions for safely stopping the engine.

Maintenance

Every 50 service hours

Details maintenance tasks for every 50 service hours.

Every 250 service hours or once a year

Outlines maintenance for 250 hours or annual service.

Every 500 service hours

Lists maintenance tasks required every 500 service hours.

Every 1000 service hours

Every 2 years

Troubleshooting

General

Problems

Lists common engine problems with causes and corrections.