Ingersoll-Rand Sierra SL 200 User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SL, SM & SH 90, 110, 132, 150, 200, 250 & 300 (50Hz)

L, H & HH 125, 150, 200, 250, 300, 350 & 400 (60Hz)

This manual contains

important safety information

and must be made available

to personnel who operate and

maintain this machine.

OPERATION AND MAINTENANCE MANUAL

LIBRO D’USO E MANUTENZIONE

MANUAL DE MANEJO Y MANTENIMIENTO

MANUAL DE OPERAÇAO E CONSERVAÇAO

C.C.N. : 80441306

REV. : D

DATE : JANUARY 2010

en pt it es

ENGLISH

PRINT LANGUAGE

PORTUGUESE

SPANISH

ITALIAN

Table of Contents

Questions and Answers:

A
Alexandria PetersenAug 25, 2025
What causes a Ingersoll-Rand Sierra SL 200 Air Compressor to fail to load?
- T
  tracyduncanAug 26, 2025
  If your Ingersoll-Rand Air Compressor fails to load, start by checking for leaking seals in the hydraulic cylinder. If the cylinder doesn't fully stroke when the 'Load' button is pressed, overhaul the hydraulic cylinder. Also, check for a defective load solenoid valve by removing the tube that runs from the load solenoid valve to the hydraulic cylinder. Start the compressor and press the 'Load' button; if oil doesn't come out of the solenoid valve, replace it.
M
Monique BeltranAug 29, 2025
How to get rid of water in Ingersoll-Rand Sierra SL 200 system?
- J
  John PowellAug 29, 2025
  If you find water in your Ingersoll-Rand Air Compressor system, start by inspecting the moisture separator/drain trap for defects and clean if required; replace if defective. Check the trap drain and drain piping for any blockages and clean them. Inspect and clean the aftercooler core if it's dirty. Ensure all enclosure panels are in place. If the unit lacks an aftercooler, consider installing one. Finally, ensure the drain line/drip leg is correctly installed, sloping the drain line away from the trap and installing a drip leg.
A
Allison BauerSep 1, 2025
Why is my Ingersoll-Rand Air Compressor making so much noise?
- M
  Meredith RothSep 1, 2025
  If your Ingersoll-Rand Air Compressor has an excessive noise level, inspect and tighten any loose component mountings. Ensure that all enclosure panels are in place. If the compressor itself is defective, contact an authorized distributor immediately and do not operate the unit.
A
Ashley RileySep 5, 2025
What to do with excessive vibration of Ingersoll-Rand Sierra SL 200 Air Compressor?
- J
  jesusallenSep 5, 2025
  If your Ingersoll-Rand Air Compressor is experiencing excessive vibration, inspect and tighten any loose components. If the motor or compressor bearing has failed, contact an authorized distributor immediately and do not operate the unit. Inspect the area for other equipment that may be causing external vibrations.
M
mitchellbrittanySep 9, 2025
Why does the pressure relief valve keep opening on my Ingersoll-Rand Air Compressor?
- J
  justin94Sep 9, 2025
  If the pressure relief valve on your Ingersoll-Rand Air Compressor opens, it could be due to the compressor operating over pressure; adjust the controller set points. Alternatively, the valve itself may be defective and require replacement.

Ingersoll-Rand Sierra SL 200 Specifications

General

Type	Rotary Screw
Power	200 HP
Drive Type	Direct Drive
Cooling Method	Air Cooled
Voltage	460V
Motor	Electric

Summary

SAFETY

DANGER!

Critical hazards requiring precise adherence to instructions.

WARNING!

Hazards that can cause death, severe injury, or substantial property damage.

CAUTIONS!

INSTALLATION / HANDLING

General Installation Procedures

OPERATING INSTRUCTIONS

Emergency Stop Function

Procedure for immediate shutdown and reset of the compressor.

Current Status Screen

Main Menu Navigation

Operator Setpoints

Adjustable variables for compressor logic control.

Sensor Calibration Procedure

Alarm and Warning Displays

Screen displays for system alarms, warnings, and history.

MAINTENANCE

Routine Maintenance Schedule

Overview of periodic maintenance tasks and safety precautions.

Air Filter Maintenance

Oil and Filter Change

Input Shaft Seal Replacement

TROUBLE SHOOTING

Compressor Fails to Start

Common causes and remedies when the compressor fails to start.

Compressor Shuts Down

Reasons and solutions for unexpected compressor shutdowns.

Low System Air Pressure

Air Leak Diagnosis

Compressor Fails to Load

Troubleshooting steps when the compressor does not load.

Water in System Issues

Noise and Vibration Issues

Pressure Relief Valve Issues

Related product manuals

Ingersoll-Rand Sierra SL 250

Preview: Ingersoll-Rand Sierra SL 90

Ingersoll-Rand Sierra SL 90

Ingersoll-Rand Sierra SL 75

Ingersoll-Rand Sierra SL 150

Ingersoll-Rand Sierra SH 200

Ingersoll-Rand Sierra L 200

Ingersoll-Rand Sierra H 200

Ingersoll-Rand Sierra HH 200

Ingersoll-Rand Sierra H 50

Ingersoll-Rand Sierra SM 55

Ingersoll-Rand Sierra SM 75

Ingersoll-Rand Sierra SH 300