03540598_ed12 15
Maintenance, Disassembly / Assembly Instructions
ST900 Lube and Torque Speci cations
Torque to
50-55 ft. lbs.
Torque to
10 ft. lbs.
Use Locktite
Torque to
55-58 ft. lbs.
Torque to
72-88 ft. lbs.
Torque to
115-135 ft. lbs.
Torque to 28-30 ft. lbs.
Torque to
90-95 ft. lbs.
Torque to
40-45 ft. lbs.
Torque to
15-20 in. lbs.
Notes:
1. Torque all Pipe Plugs and Vents to 6 ft./lbs. Lubricate the
same with the Pipe Sealant with Teon.
2. Apply Parker O-lube to all O-rings.
Torque to
49-51 ft. lbs.
Torque to
40-45 ft. lbs.
Apply 175 ml
of Dexron
Do not apply
while Housing is hot.
5-10 ft. lbs.
O-Ring
Lube
1-2 drops
of Hermanite 116
ST700-K166
Coat Clutches and Splines
with IR # 130 Grease
Coat Bore with
IR # 130 Grease
Coat Pinion with
IR # 130 Grease
Pack with IR # 130
Grease (225-250 ml)
Coat Clutched and
Splines with IR # 130 Grease
Apply 15 ml
of Dexron
Coat with
Dexron
Coat Bore with
IR # 130 Grease
Coat Shaft with
IR # 130 Grease
(Dwg. TPB1020)
To Next Page
Loading...
