Ingersoll-Rand TEM6A0C36H31S

To Next Page

SSAAFFEETTYY WWAARRNNIINNGG

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and

air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered

equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the

literature and on the tags, stickers, and labels that are attached to the equipment.

January 2016

18-GF74D1-1F-EN

Convertible Air Handlers

2 — 5 Ton

TEM6A0B24H21S

TEM6A0B30H21S

TEM6A0C36H31S

TEM6A0C42H41S

TEM6A0C48H41S

TEM6A0D48H41S

TEM6A0C60H51S

TEM6A0D60H51S

The TEM6 series air handler is designed for installation in a closet,

utility room, alcove, basement, crawlspace or attic. These versatile

units are applicable to air conditioning and heat pump

applications. Several models are available to meet the specific

requirements of the outdoor equipment. Field installed electric

resistance heaters are available.

Installer’s Guide

Main Page

Need help?

Do you have a question about the Ingersoll-Rand TEM6A0C36H31S and is the answer not in the manual?

Summary

Safety Section

Features

Airflow Adjustment

Procedure for adjusting blower speed using ECM fan control and dip switches.

Wiring

Guidelines for field wiring installation, including NEC and local code compliance.

Thermostat

Sequence of Operation

Explanation of how the unit operates in cooling and heating modes.

Operational and Checkout Procedures

Procedures for verifying proper performance and completing installation checks.

Maintenance

Guidelines for periodic maintenance, including filter replacement and component inspection.

Installation Instructions

Field Wiring

Single Stage Cooling Only Wiring

Wiring diagram for single-stage cooling-only thermostat connections.

Single Stage Heat Pump Wiring

2 Stage Cooling Only Wiring

2 Stage Heat Pump Wiring

Electrical Data

Subcooling Adjustment

Subcooling Adjustment for Specific Models

Coil Conversion Instructions

Downflow Configuration Conversion

Horizontal Right Configuration Conversion

Checkout Procedures