Need help?Do you have a question about the INIM Electronics SmartLoop and is the answer not in the manual?
General| Brand | INIM Electronics |
|---|---|
| Model | SmartLoop |
| Category | Control Panel |
| Language | English |
States the document's content is the sole property of Inim Electronics s.r.l.
Highlights design standards, EN54-2, EN54-4 compliance, and IMQ certification.
Provides the name, address, and contact details of the manufacturer.
Specifies the control panel model and year of manufacture.
Lists the user, installation, and programming manuals supplied.
Details the edition, printing date, and code for the user's manual.
Manages multiple consoles and the main console layout on the frontplate.
Details the function of the alphanumeric display, navigation keys, and ESC/Enter keys.
Explains the alphanumeric keypad, keyswitch, EVACUATION, and RESET buttons.
Describes the SILENCE, INVESTIGATE, BUZZER, and TEST buttons.
Explains the meaning of SILENCE, RESET, INVESTIGATE, ALARM, PRE-ALARM, and FAULT LEDs.
Details the CPU, BYPASS, TEST, NIGHT, ON, and BATTERY LED indicators.
Explains EARTH, FUSE, MAINS, BELLS, and DIALLER related LEDs.
Outlines tasks for security personnel, including panel access and operation.
Provides guidance for building occupants during alarm and pre-alarm conditions.
Details how to manage alarm/pre-alarm status using SILENCE and RESET buttons.
Explains how to interpret and handle various fault conditions indicated by LEDs.
Describes signaling that does not require specific action, like BYPASS or TEST LEDs.
Explains the order of events and how to view active events and the event log.
Allows clearing the call queue and enabling/disabling Alarm and Fault calls.
Enables temporary access to other control panels within the network.
Explains how to monitor and command a remote control panel from another console.
Allows viewing detector status and parameter values like sensitivity and contamination.
Details the procedure to test all panel LEDs by activating them briefly.
To Next Page
