To Next PageTo Next Page
Need help?Do you have a question about the INIM Electronics SmartLine020-2 and is the answer not in the manual?
General| Partitions | 4 |
|---|---|
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 95% non-condensing |
| Protection Rating | IP30 |
| Communication Interface | RS485 |
Details wiring procedures for detection lines, generic contacts, and I/O lines.
Explains connecting alarm diallers, fault communications, and RS485 BUS devices.
Covers connecting fault, alarm, NAC, AUX, RELAY outputs, and the extinguishant module.
Details connecting mains power, batteries, and the thermal probe for system operation.
Provides a detailed checklist for verifying wiring before powering up the system.
Guides through the system power-up sequence, including LED status and reset procedures.
Details programming zone parameters, detection line types, and I/O line configurations.
Introduces programming options for outputs like RELAY and NAC.
Explains the wizard-based procedure for configuring detection line thresholds.
Illustrates the logic flow for automatic and manual activation of the extinguishant system.
Lists routine tasks like cleaning, LED tests, event log viewing, and day/night mode management.
Explains how to diagnose and resolve 'Open' and 'Shorted' faults on terminals.
Provides steps to troubleshoot issues with repeaters and battery faults.
Lists common fault messages like Dialler Fault, Mains Fail, and Maintenance expiry.
