Add device in AP mode:
Plug the device in the socket and make sure that the
device is in the AP Configuration State (the LED symbol
is flashing slowly, interval flashing 1500ms).
click “Confirm indicator slowly blink” and then select
Wi-Fi network, enter Wi-Fi password, click “confirm” to
enter connection process.
Press “Connect now” and it will go to your WLAN Setting
in your smart phone, select the “SmartLife-XXXX” to
directly connect to the router without putting in password.
Go back to app to enter into the automatic connection
interface.
Click “Done” after adding device successfully and enter
into device controlling interface.
In the temperature control mode, user is able to set
control function via APP.
6
To Next Page
Loading...
