Inkbird IHT-2XP - Page 7

Step 2: press or button to choose ON or OFF.
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose BLT function.
Step 2: press or button to decrease or increase
the value; long press or button to quickly
decrease or increase the value. (The active time of the
backlight is adjustable from 5 to 60 seconds.)
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose ALM function.
06
Backlight Active Time
Alarm Function for the Built-in Probe