Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose TS function.
Step 2: press or button to choose ON or OFF.
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
Step 2: press or button to decrease or increase
the value; long press or to quickly decrease or
increase the value.
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
07
Alarm Value Setting for the Built-in Probe
To Next Page
Loading...
