Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose CA function.
Step 1: press and hold button for 2 seconds to enter
the menu for function setting, then press the button to
choose ALM1 function.
Step 2: press or button to decrease or increase
the value; long press or to quickly decrease or
increase the value.
Step 3: press and hold button for 2 seconds to quit
and save changes. (All changes will be automatically
saved if there is no operation in 30 seconds.)
When the current temperature is 75.5℉, the screen
displays 75.8℉ after setting the CA value as 0.3℉.
08
Temperature Calibration for the
Built-in Probe
Alarm Function for P1
(the External Probe 1)
To Next Page
Loading...
