(H1)x8
(H2)x8
(H3)x8
(H4)x1
Allen Wrench
Bolts 1/4"x 5/8''L
Lock Washers 1/4"
Flat Washers 1/4"
(H5)x4
Adjustable Levelers 1/4"
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 4: Assemble the Adjustable Levelers (H5) as shown below:
Step 3:
Attach the assembled Metal Legs (P2) to the table top (P1) as shown below.
Step 5:
a. Turn the table to an upright position.
b. To level table. If there is a gap between a leg and the floor, please adjust the adjustable leveler
up or down under each leg.
c. Assembly is complete.
Thank you for your purchase
To Previous Page
Loading...
