4. After installation, check the power on/off and
other functions to ensure everything is normal.
Check the screws again and tighten them
before riding the scooter.
1.Install Inmotion App on Android or
iOS devices, register it, and log in.
2.When the scooter turned on, by default,
Bluetooth enters the status of the waiting
connection. Connected the scooter with APP.
The icon is always on once the connection
is successful, an the user can start using the
APP to operate.
3. Follow the tips from App and Activate
the scooter, and learn how to drive safely.
Now, you can start using your scooter,
and check its status and function and
operate via the APP.
8
5 Initial use
There are safety risks when using scooters. Before the initial use, users must carefully read the safe driving guide
through the APP. For safety consideration, the new scooter is not activated, and there will be intermittent beep
prompts after booting. Before activation, the speed of the scooter was very low and all functions could not be
used. You need to install the APP on your mobile device (Bluetooth 4.0 and above), connect your scooter via
Bluetooth, and activate your scooter as prompted by the APP.
Scan the QR-code to download Inmotion App.
To Next Page
Loading...
