10
To avoid accidental touch, by factory default, the motor and throttle will be started only
when scooter be in the taxi state, and the throttle does not work after the scooter stops.
3. Gently press the throttle on the right handlebar to accelerate, but please do not be too fast. Hold the brake to make the scooter slow down
(Try to avoid emergency braking) . When the scooter stops or taxis slowly, get down one foot first, then get off normally.
2. Stand on the footrest with one foot, the other foot kicked back on the ground and began to glide. The motor can only be started after
the vehicle speed reaches 3km / h. Gently press the throttle on the right handlebar, the scooter can ride slowly, hold the handlebar
to control the riding direction (similar to riding bicycle).
To Next Page
Loading...
