EasyManuals Logo

InMotion SCV V10F User Manual

InMotion SCV V10F
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10
4.2. Anti-spinning Button
Due to the unique algorithm of V10, if the body angle varies after the unicycle body lifts off the ground under normal startup state, it will
lead to motor spinning acceleration until the unicycle shuts down. If being placed on the ground during motor acceleration, the unicycle
will be likely to fly off due to the friction between wheels and ground, and there will a risk of running into others in some cases, such as
elevators, stairs, getting on or off the bus, or crowed places.
The anti-spinning button below the body handle is designed for the V10 according to its characteristics. When the user holds the handle
to lift up the unicycle, the key will be automatically triggered, and the unicycle will enter the sleep state. In the meantime, the motor will
no longer rotate to avoid spinning accordingly. Remove your hand from the handle key to let the unicycle fall to the ground again.
The unicycle will return to normal condition for continual use.
The anti-spinning function is activated by default when V10 leaves the factory. You need to turn off this function on the mobile APP if
installing the learning rope for operation on the handle. Users need to know the above functions and agree to accept the relevant legal
liability statements when using this function.
4.3. Over-load Protection
INMOTION SCV V10 restricts the maximum driving speed and maximum load to avoid the dangers caused by driving too fast. When the
power of unicycle comes close to the maximum power set by the system, the pedal will slightly tilt up for 3~25° accompanied by alarm
sound. Users must slow down at this time. Do not tread the pedals forcibly (there is a risk of car crash if tread the pedals forcibly, the
personal injuries and all losses caused by failure to operate according to the specification shall be borne by the users themselves). The
pedal will return to normal angle once returning to normal power. When the electric quantity is less than 40%, the maximum speed limit
will reduce gradually. When the electric quantity comes up to or is lower than the minimum driving voltage (10%), the unicycle body will
automatically tilt up the pedal to give the user the hint to stop driving, otherwise it will cause damage to the unicycle.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InMotion SCV V10F and is the answer not in the manual?

InMotion SCV V10F Specifications

General IconGeneral
BrandInMotion
ModelSCV V10F
CategoryBicycle
LanguageEnglish

Related product manuals