15
6. Maintenance and Service
6.1. Storage
Inappropriate storage will shorten the life of built-in lithium batteries or cause other hidden dangers. Please store the V10 in a dry room
at suitable temperature and humidity. If you do not use it for a long time, please fully charge its battery at room temperature and at
least once every month later.
6.2. Air Inflation and Inner and Outer Tire Replacement
If the tire pressure is insufficient, please conduct air inflation in time. The factory tire pressure of INMOTION SCV V10 is 2.8Bar by default.
If the tire of V10
needs to be replaced due to tire burst, etc., please contact the dealer authorized by INMOTION or the after-sales
service department of INMOTION for maintenance.
6.3. Pedal Tightness Adjustment
Riders will feel uncomfortable if the pedals of V10 become loose, and will even fall under severe condition. If the pedals become loose,
please respectively use a M10 Allen driver and a M6 Allen driver to tighten the screws on the axis and on the side edge of the axis. Please
develop a habit of checking all parts of the V10 before using.
6.4. Precautions for Cleaning and Use
· Before cleaning the unicycle, the body shall be shut down. Charging wire shall be pulled up, and the charging port shall be closed.
· During rinsing, make sure that water does not enter the battery-charging port.
· Use a soft cloth dipped with clean water to scrub the outer cover of the V10. Do not use high-pressure water jet to flush the V10.
To Next Page
Loading...
Need help?
General
