11
4.4. Over-temperature Protection
INMOTION sets a protection mechanism to avoid excessive battery temperature when the unicycle operates under high load for a long time.
When the battery reaches temperature limit, the unicycle will indicate overload and the pedals will turn up as well. Once power off the
unicycle, it is not able to turn on temporarily. Users are supposed to restart it after 15 minutes.
4.5. Slant Protection
When the left and right tilt angle of the unicycle body is more than 55° during driving, the system will induce the abnormality of the unicycle
body, and will automatically exit the self-balancing mode, so as to prevent the personal injuries caused by high-speed rotating tires after the
tilting of the unicycle body. In the meantime, the unicycle will play the prompt tone. It is only necessary to right the unicycle body at this time
to automatically enter the self-balancing mode.
4.6. Digital Bluetooth
INMOTION SCV is equipped with built-in digital Bluetooth 4.0 BLE module, which is used for interacting with the vehicles connected with the
INMOTION APP. The name of the Bluetooth 4.0 BLE of INMOTION SCV is V10-XXXXXXXX. XXXXXXXX refers to the last 8 digitals of the
product serial number.
BLE Bluetooth needs to be connected via the INMOTION APP instead of the built-in settings of mobile phones. The initial password of
Bluetooth connection via the INMOTION APP is 000000. INMOTION SCV can be added and controlled after entering the password. (Only the
owner of the INMOTION SCV has the authority of Bluetooth password modification. The user can only modify the password of this unicycle
after the authentication of the unicycle owner.)
After the user enters the unicycle owner authentication, click to enter the "Unicycle Status”interface of the INMOTION APP. Select the
option of "Password Modification" to modify the Bluetooth password.
To Next Page
Loading...
Need help?
General
