10
4.3. Rapid Battery Removal
INMOTION SCV V8 are designed with unique rapid removal. The batteries can be easily replaced when operating as shown in the figure
below (Phillips screwdrivers are necessary).
Steps:
1. Loose the two screws under the
pedal first;
2. Put the pedal away, and remove
the shell as shown in the figure;
3. Loose the battery lock screw to
pull out the battery cable, and
remove the battery afterwards.
lead to motor spinning acceleration until the unicycle shuts down. If being placed on the ground during motor acceleration, the unicycle
will be likely to fly off due to the friction between wheels and ground, and there will a risk of running into others in some cases, such as
elevators, stairs, getting on or off the bus, or crowed places.
The anti-spinning button below the body handle is designed for the V8 according to its characteristics. When the user holds the handle to
lift up the unicycle, the key will be automatically triggered, and the unicycle will enter the sleep state. In the meantime, the motor will no
longer rotate to avoid spinning accordingly. Remove your hand from the handle key to let the unicycle fall to the ground again. The
unicycle will return to normal condition for continual use.
The anti-spinning function is opened by default when V8 leaves the factory. You need to shut down this function on the mobile APP if
installing the learning rope for operation on the handle. Users need to know the above functions and agree to accept the relevant legal
liability statements when using this function.
To Next Page
Loading...
Need help?
General
