Need help?Do you have a question about the Innova 3150e and is the answer not in the manual?
General| Brand | Innova |
|---|---|
| Model | 3150e |
| Category | Test Equipment |
| Language | English |
Explains the purpose and function of On-Board Diagnostics (OBD) systems.
Steps to connect and operate the diagnostic tool.
How stored codes and data are displayed on the tool.
Reading code definitions and viewing specific data.
General safety warnings and precautions for using the diagnostic tool.
Details on which vehicles the diagnostic tool is compatible with.
Information on locating the vehicle's Data Link Connector.
Instructions for replacing the batteries in the diagnostic tool.
Initial setup for language and units after battery replacement.
Identifies and describes the various buttons and indicators on the diagnostic tool.
Explains the various elements and icons displayed on the diagnostic tool's screen.
Introduction to electronic engine control systems and their purpose.
Overview of the first generation of onboard diagnostics.
Overview of the second generation of onboard diagnostics.
Definitions of terms related to OBD2 systems.
Explains what DTCs are and how they are used for diagnosis.
Explains the function and types of OBD2 monitors.
Step-by-step instructions for retrieving diagnostic trouble codes.
How to view freeze frame data recorded when a DTC is set.
Accessing enhanced DTCs, ABS, SRS, and other vehicle systems.
Retrieving and viewing manufacturer-specific diagnostic trouble codes.
Instructions for retrieving and viewing Anti-Lock Brake System codes.
Instructions for retrieving and viewing Supplemental Restraint System codes.
Procedure for erasing DTCs from the vehicle's computer memory.
Understanding and performing Inspection and Maintenance (I/M) readiness tests.
Information about the web-based diagnostic and repair service.
History of Chrysler on-board computer systems.
Lists Chrysler fuel injected vehicles covered by the OBD1 system.
Explains the function of dashboard warning lights.
Describes the location and type of Chrysler DLC connectors.
Steps to retrieve diagnostic trouble codes for Chrysler/Jeep OBD1 systems.
Procedure to erase DTCs from Chrysler/Jeep OBD1 systems.
Overview of Ford's EEC-IV computer control systems.
Lists Ford, Lincoln, Mercury cars covered by the system.
Lists Ford trucks and vans covered by the system.
Describes Ford vehicle test connectors.
Steps for connecting the diagnostic tool and understanding DTC types.
Overview of Ford's code retrieval process and reviewing DTCs.
Procedure for performing the Key On Engine Off (KOEO) Self-Test.
Procedure to check ignition timing for Ford OBD1 systems.
Procedure for performing the Key On Engine Running (KOER) Self-Test.
Performing a cylinder balance test on EEC-IV systems.
Performing relay and solenoid output state checks on EEC-IV systems.
Performing a wiggle test to check for intermittent faults.
Procedure to erase DTCs from Ford OBD1 systems.
Overview of GM vehicle computer systems and diagnostic capabilities.
Lists GM domestic cars and trucks compatible with the diagnostic tool.
General description of the diagnostic tool's function.
Information on the GM Data Link Connector.
Explanation of the Malfunction Indicator Light (MIL).
Explanation of DTCs and their types for GM vehicles.
Steps to retrieve diagnostic trouble codes from GM OBD1 systems.
Procedure to erase DTCs from GM OBD1 systems.
Overview of Honda/Acura computer systems and diagnostic capabilities.
Lists Honda/Acura vehicles covered by the diagnostic tool.
General description of the diagnostic tool's function.
Information on the Honda Data Link Connector.
Explanation of the Malfunction Indicator Light (MIL).
Steps to retrieve diagnostic trouble codes from Honda OBD1 systems.
Procedure to erase DTCs from Honda OBD1 systems.
Overview of Toyota/Lexus OBD1 systems.
Lists Toyota/Lexus vehicles covered by the diagnostic tool.
Information on Toyota/Lexus Data Link Connectors.
Explanation of the Malfunction Indicator Light (MIL).
Steps to retrieve diagnostic trouble codes from Toyota/Lexus OBD1 systems.
Procedure to erase DTCs from Toyota/Lexus OBD1 systems.
Retrieving VIN, calibration IDs, and CVNs for modern vehicles.
Retrieving a list of supported modules in the vehicle.
Retrieving performance tracking statistics for vehicle monitors.
Procedure to reset the vehicle's oil maintenance reminder light.
Using the tool to locate the vehicle's Data Link Connector.
Performing checks on the vehicle's battery and alternator system.
Viewing the diagnostic tool's current firmware and version information.
Accessing reference information like monitor icons and DTC definitions.
Viewing full names for I/M Monitor Status icons.
Accessing OBD1 DTC definitions from the tool's library.
Accessing OBD2 DTC definitions from the tool's library.
Understanding the meaning of the diagnostic tool's System Status LEDs.
Configuring tool settings like language, brightness, and footers.
Adjusting the brightness level of the tool's display screen.
Turning the audible tone for button presses on or off.
Setting the display language to English, French, or Spanish.
Setting display units to USA or metric.
Viewing functional descriptions of the tool's hotkeys.
Viewing DTCs and other data stored in the tool's memory.
List of OBD2 Parameter Identifiers and their meanings.
Lists vehicle makes supported for ABS code retrieval.
Lists vehicle makes supported for SRS code retrieval.
Lists vehicle makes supported for oil maintenance light reset.
Details of the product's one-year limited warranty terms.
Contact information for technical support and service.
To Next Page
