22
6.1 Interface
The control can only be installed on the view versions
AirLeaf SL, AirLeaf SLS, AirLeaf RS.
6.1.1 Description
speeds and thermostat allows:
• room temperature control
• management of the main functions of the device
The electronic control on-board the unit is equipped with:
• internal memory with data saving even in case of
shut-down or power outage
in the compartment on the unit's coil, the functions can be
regulated:
• minimum temperature in heating mode (30 °C)
• maximum temperature in cooling mode (20 °C)
The room temperature probe ensures an antifreeze
safety even when the control is in stand-by
After 20 seconds after the last action the panel bright-
ness is reduced, only the room temperature is seen on
the display. The maximum brightness is restored to the
pressure of any key.
6.1.2 Display
Statuses and active alarms on display.
A Display area
Automatic function active
Minimum ventilation speed active
Maximum ventilation speed active
Super Silent function active
Heating function on
Cooling function on
The appliance is in stand-by mode
Resistance enabled indication
6.1.3 Keys functions
A Keys area
Up key
Down key
This can be used to select the operating mode (Cooling or Heating)
Enables Automatic function
Enables Super Silent function
Enables Maximum ventilation speed function
Enables the Minimum ventilation speed function with ventilation
speed limitation to a low value
To Next Page
Loading...