Need help?Do you have a question about the innovair EV24C2DB6 and is the answer not in the manual?
General| Brand | innovair |
|---|---|
| Model | EV24C2DB6 |
| Category | Air Conditioner |
| Language | English |
General safety instructions to prevent injury and property damage.
Specific warnings and precautions for installation and operation.
Instructions and advice for operating the air conditioner safely and efficiently.
Lists indoor and outdoor unit model names by cooling capacity.
Detailed dimensions and installation hole specifications for indoor units.
Dimensions and required service space for outdoor units.
Schematic diagram illustrating the electrical connections for indoor units.
Schematic diagram illustrating the electrical connections for outdoor units.
Specifications for tightening torque of pipe connections during installation.
Recommendations for selecting power cord cross-sectional area based on current.
Details on standard pipe length, maximum elevation, and refrigerant amounts.
Procedures for initial system installation, including purging and leak checks.
Procedure for adding refrigerant to systems that have been in use for many years.
Steps for collecting refrigerant before indoor unit repair and re-installation.
Steps for system evacuation and refrigerant charging after outdoor unit repair.
Definitions of abbreviations used for temperature sensors and functions.
Explanation of icons and indicators shown on the indoor unit display board.
Details on fan operation, compressor rules, and mode specifics for cooling and heating.
Information on auto-mode selection, defrosting conditions, and temperature protection.
Description of drying mode, forced operation, and various timer settings.
Details on sleep mode, auto-restart, louver memory, and refrigerant leakage detection.
List of error codes displayed by the indoor unit and their corresponding failures.
Diagnostic flowcharts and solutions for common operational issues and errors.
Diagnosing and resolving issues related to temperature sensors and PCB defects.
Troubleshooting steps for communication errors between indoor and outdoor units.
Diagnostic procedures for refrigerant leakage detection and related solutions.
To Next Page