Inogen One G3 Technical Manual

CONFIDENTIAL and
PROPRIETARY
96-03996-00-01 revF
DCR-15-284
INOGEN ONE G3 OXYGEN CONCENTRATOR
TECHNICAL MANUAL
Page 14 of 20
3.2.3. Surface Cleaning
The outside case should be cleaned using a cloth dampened with a solution of mild
detergent (e.g., dishwashing detergent, such as Dawn
TM
) and water. Avoid getting water
in or around the battery connectors, power jack, or vents.
3.2.4. Battery Care and Maintenance
The Inogen One G3 Lithium Ion Battery requires special care to ensure proper
performance and long life. Use only Inogen One G3 Batteries with the Inogen One G3
Oxygen Concentrator.
DESIGN
NOTE
The Inogen One G3 Oxygen Concentrator adjusts its oxygen production rate to
match the oxygen demand specified by the user flow setting. When the device
is used at lower settings, its battery life is extended. Additionally, at lower
flow settings, the concentrator does not generate as much heat and noise,
draw as much electric current from external power supplies, and many system
components do not wear as quickly.
Initial Battery State
The Inogen One G3 batteries are shipped 40% to 100% charged.
The battery can be used immediately; however, we recommend the battery be
charged upon receipt to ensure adequate run time.
Normal Charging
The battery is operating properly when a battery icon is displayed on the LCD
screen.
The Inogen One G3
packs. The Inogen One G3 batteries can be partially charged and discharged
without damaging the battery packs.
Effect of Temperature on Battery Performance
The Inogen One G3 battery powers the Inogen One G3 Oxygen Concentrator from

Inogen One G3 Specifications

General

Brand	Inogen
Model	One G3
Category	Medical Equipment
Language	English