Inogen One G3 Technical Manual

CONFIDENTIAL and
PROPRIETARY
96-03996-00-01 revF
DCR-15-284
INOGEN ONE G3 OXYGEN CONCENTRATOR
TECHNICAL MANUAL
Page 6 of 20
2. SETTING UP A PATIENT ON INOGEN ONE G3
2.1. Indications for Use
The Inogen One G3 Oxygen Concentrator is used on a prescriptive basis by patients requiring
supplemental oxygen. It supplies a high concentration of oxygen and is used with a nasal
cannula to channel oxygen from the concentrator to the patient. The Inogen One Oxygen
Concentrator may be used in a home, institution, vehicle and various mobile environments.
NOTE
Availability of an alternate source of oxygen is recommended in case of power
outage. Several certifying bodies for Home Health Care Providers require that
back-up oxygen be available to the patient. Supplemental oxygen cylinders or
extra Inogen One G3 Batteries may satisfy these requirements.
CAUTION
Oxygen demand of some patients, particularly those with high breathing rates
and high flow settings, may exceed the capabilities of the Inogen One G3. Inogen
suggests that each patient be titrated to assure that the Inogen One G3 is an
appropriate solution for their needs.
2.2. System Components
The following are standard components of the Inogen One system:
o Inogen One G3 Oxygen Concentrator
o 8 Single Battery, BA-300
o AC to DC Power Supply, BA-301
o DC Power Cord
o Carry Bag
o Cannula
Patient Set-Up. To properly set up a patient on the Inogen One G3 System, you may need
to provide:
o Pulse Oximeter (for titration, not included)
o Extra cannulas (not included)

Inogen One G3 Specifications

General

Brand	Inogen
Model	One G3
Category	Medical Equipment
Language	English