Inogen One G3 - Operating Instructions; Initial Setup and Battery Installation

11
Operating Instructions Chapter 3
English
Operating Instructions
3
!
C
Exhaust
General Instructions
1. Place the Inogen One® G3 in a well ventilated location.
Air intake and exhaust must have clear access.
Locate the Inogen One® G3 in such a way that any
auditory alarms may be heard.
WARNING Avoid use of the Inogen One® G3 in presence of pollutants, smoke
or fumes. Do not use the Inogen One® G3 in presence of flammable
anesthetics, cleaning agents or other chemical vapors.
CAUTION Do not obstruct air intake or exhaust when operating the device.
Blockage of air circulation or proximity to a heat source may lead to
internal heat buildup and shutdown or damage to the concentrator.
2. Ensure both particle filters are in place.
CAUTION Do not operate the Inogen One® G3 without both
particle filters in place. Particles drawn into the
system may damage the equipment.
3. Install the battery.
Insert the Inogen One® G3 battery by sliding
battery into place until the latch returns to the
upper position.
Intake