‑10‑
Item Specification
Isolation Yes
Input action display Input indicators are turned ON (via software
control) when the inputs are in the driving
state
Input derating 75% derating at 55°C (the number of ON inputs
does not exceed 12), or 10°C derating when all
inputs are ON
■ Software specifications
Item Specification
Software input filter time Options include Without filter, 0.25 ms, 0.5 ms, 1ms (factory
setting), 2 ms, 4 ms, 8 ms, 16 ms, and 32 ms. You can set two
filter time parameters, each for a group consisting of 8
channels.
Input port anomaly
detection and indication
N/A
Input channel logic level
configuration
Not supported
Independent channel enable
configuration
Not supported
Diagnostic report
configuration
Not supported
When in stop mode Outputs are not refreshed, inputs can be refreshed when in
state SAFE‑OPERATIONAL
I/O mapping Supports bitwise, bytewise and wordwise addressing
To Next Page
Loading...
