5 Parameter Table
- 41 -
Para� No� Para� Name Setting range Unit
U0-49 Off-line times of can bus 0 to 65535 1
U0-55 Extension card type 0 to 65535 1
U0-56 Extension card rmware version 0 to 65535 1
Group U1: Hydraulic Pressure Monitoring
U1-00 Electrical angle 0�0° to 359�9° 0�1°
U1-01 Pressure command 0�0 kg/cm
2
to A3-02 0�1
U1-02 Pressure feedback 0�0 kg/cm
2
to A3-02 0�1
U1-03 Motor speed feedback -9999 to 30000 rpm 1 rmp
U1-04 AI1 voltage -9�999 to 9�999 V 0�001 V
U1-05 AI2 voltage -9�999 to 9�999 V 0�001 V
U1-06 AI3 voltage -9�999 to 9�999 V 0�001 V
U1-07 AI1 zero drift -9�99 to 9�99 V 0�01 V
U1-08 AI2 zero drift -9�99 to 9�99 V 0�01 V
U1-09 AI3 zero drift -9�99 to 9�99 V 0�01 V
U1-10 Flow command 0�00 Hz to F0-10 0�01 Hz
U1-11 Resolver signal interference extent 0 to 1000 (off-line) 1
U1-12 Pressure command from host computer 0�0 kg/cm
2
to A3-02 0�1
U1-13 CANLink communication interference extent 0 to 128 (off-line) 1
To Next Page
Loading...
