Inovance IS300T070-C User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300T070-C Specifications

General

Brand	Inovance
Model	IS300T070-C
Category	Servo Drives
Language	English

Summary

Chapter 1 Safety and Precautions

Safety Precautions

Essential safety guidelines for proper installation and operation of the servo driver.

Chapter 2 Product Information

Technical Specifications

Provides detailed technical specifications and performance data for the IS300 servo driver.

Routine Repair and Maintenance

Chapter 3 Mechanical and Electric Installation

Mechanical Installation

Covers installation environment, mounting, and cooling requirements for proper servo driver installation.

Electrical Installation

Details external electrical parts, wiring, and terminal connections for safe and effective servo driver setup.

Chapter 4 Operation and Display

Operation and Display Interface

Function Code Viewing and Modification

Shortcut Menu Operation

Automatic Tuning of Motor Parameters

Guides the user through the automatic tuning process for motor parameters to ensure optimal control performance.

Chapter 5 Function Parameter Table

Group F0 Basic Function

Group F1 Motor Parameters

Parameters for configuring motor characteristics and identification.

Group F2 Vector Control

Parameters specific to the vector control mode for precise motor control.

Group F3 V/F Control

Parameters for the V/F control mode, suitable for fan and pump loads.

Group F4 Input Terminal

Group F5 Output Terminal

Group F6 Start/Stop Control

Parameters that control the driver's start, stop, and speed tracking behaviors.

Group F9 Fault and Protection

Parameters related to fault detection, protection mechanisms, and error handling.

Chapter 7 Servo Pump Commissioning Steps and Prototyping of servo pump optional parts

Servo Pump Commissioning Process

Servo Pump Commissioning Steps

Details the step-by-step procedures for commissioning the servo pump and motor.

Chapter 9 Failure Diagnosis and Solution

Failure Diagnosis and Solution

Explains how to diagnose and resolve common faults and errors using the driver's information.

Common Fault and Resolution

Lists common faults, their possible causes, and recommended solutions for troubleshooting.