Inovance IS300T040-C - User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Summary

Chapter 1 Safety and Precautions

1.1 Safety Precautions

Covers essential safety guidelines before, during, and after installation and operation.

1.2 Precautions

Chapter 2 Product Information

2.4 Technical Specifications

Provides detailed technical specifications for the IS300 servo driver.

2.7 Routine Repair and Maintenance of Servo Driver

Outlines procedures for routine repair, inspection, and cleaning of the servo driver.

Chapter 3 Mechanical and Electric Installation

3.1 Mechanical Installation

3.2 Electrical Installation

Details external electrical parts, wiring, and control terminal connections.

Chapter 4 Operation and Display

4.2 Description of Function Code Viewing and Modification Methods

4.6 Automatic Tuning of Motor Parameters

Provides procedures for automatically tuning motor parameters for optimal performance.

Chapter 5 Function Parameter Table

Chapter 7 Servo Pump Commissioning Steps and Prototyping of servo pump optional parts

7.1 Servo Pump Commissioning Process

7.2 Servo Pump Commissioning Steps

Details the step-by-step procedure for motor commissioning and servo pump application.

Chapter 9 Failure Diagnosis and Solution

9.1 Failure Diagnosis and Solution

Explains how to perform self-checks and analyze fault causes based on warning codes.

9.2 Common Fault and Resolution

Lists common faults, their possible causes, and suggested solutions.

Inovance IS300T040-C Specifications

General

Brand	Inovance
Model	IS300T040-C
Category	Servo Drives
Language	English