Inovance IS300 Series User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300 Series Specifications

General

Brand	Inovance
Model	IS300 Series
Category	Servo Drives
Language	English

Summary

Chapter 1 Safety and Precautions

1.1 Safety Precautions

Lists safety precautions before, during installation, and wiring.

1.2 Precautions

General precautions for motor insulation, thermal protection, and heating.

Chapter 2 Product Information

2.4 Technical Specifications

Provides detailed technical specifications for the servo driver functions.

2.7 Routine Repair and Maintenance of Servo Driver

Chapter 3 Mechanical and Electric Installation

3.1 Mechanical installation

Covers installation environment requirements like temperature and mounting.

3.2 Electrical Installation

3.2.5 Control terminals and connection

Explains the layout and function of control circuit terminals.

Operation and Display

Chapter4 Operation and Display

4.2 Description of Function Code Viewing and Modification Methods

4.3 Shortcut Menu Operation Mode

4.6 Automatic Tuning of Motor Parameters

Procedures for automatic tuning of motor parameters for vector control.

Group F2 Vector Control Parameters

Group F4 Input Terminal

Group F5 Output Terminal

Group F6 Start/Stop Control

Group F8 Auxiliary Function

Group F9 Fault and Protection

Parameters for configuring motor overload, stall, and transient protection.

Chapter 6 Parameter Description

Group A0 Weak magnetism and SVC control group (SAV control reserved)

Chapter 7 Servo Pump Commissioning Steps and Prototyping of servo pump optional parts

7.1 Servo Pump Commissioning Process

7.2 Servo Pump Commissioning Steps

Detailed steps for servo pump commissioning.

Chapter 8 EMC (Electromagnetic Compatibility)

8.3 EMC Guide

Failure Diagnosis and Solution

Chapter 9 Failure Diagnosis and Solution

Guides users on diagnosing and resolving common driver faults and errors.

9.2 Common Fault and Resolution

Provides a table of common faults, their causes, and solutions.

Group F1 Motor Parameters

Group F2 Control Parameters

Parameters for vector control, including speed loop gains and integration times.

Group F3 V/F Control Parameters

Parameters for V/F control, such as V/F curve setup and torque boost.

Group F4 Input Terminal

Group F5 Output Terminal

Group F6 Start/Stop Control

Group F7 Keyboard and Display

Appendix 2 Shortcut menu parameters table

uA3-05 Oil pressure control Kp1

uF2-00 Speed loop proportional gain 1

Parameter for setting the speed loop proportional gain (P1).