Inovance IS300T050-C User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300T050-C Specifications

General

Model	IS300T050-C
Output Current	5.0A
Cooling Method	Natural Cooling
Control Mode	Position, Speed, Torque
Communication	RS485, CANopen
Protection Features	Overcurrent, Overvoltage, Overtemperature
Operating Temperature	0°C ~ +55°C
Storage Temperature	-20°C ~ +70°C
Humidity	5% ~ 95% (non-condensing)
Vibration Resistance	5.9 m/s² (10-150 Hz)
Altitude	1000m
Dimensions	150 x 70 x 150 mm
Power Supply	Single-phase/three-phase

Summary

Chapter 1 Safety and Precautions

Safety Precautions

Critical safety measures before, during, and after installation/operation.

Chapter 2 Product Information

Chapter 3 Mechanical and Electric Installation

Mechanical Installation

Details the mechanical aspects of installing the servo driver, including environment and cooling.

Electrical Installation

Details electrical wiring, connections, and external parts for the driver.

Main Circuit and Control Terminals

Chapter 4 Operation and Display

Operation Interface Overview

Parameter Access and Tuning

Explains parameter viewing, modification, shortcut menus, and auto-tuning.

Chapter 5 Function Parameter Table

Advanced Control and Motor Setup

Control Mode Parameters

Details parameters for vector (F2) and V/F (F3) control modes.

Input, Output, and Start/Stop Control

System, Auxiliary, Protection, and Security

Chapter 7 Servo Pump Commissioning Steps

Servo Pump Commissioning Process

Motor Commissioning Steps

Provides detailed steps for commissioning the servo pump, focusing on motor setup.

Chapter 8 EMC (Electromagnetic Compatibility)

EMC Guide and Handling

Chapter 9 Failure Diagnosis and Solution

Failure Diagnosis and Solution

Guides users on diagnosing and resolving common faults and issues.

Common Faults and Resolutions