Inovance IS300T140-C User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300T140-C Specifications

General

Brand	Inovance
Model	IS300T140-C
Category	Servo Drives
Language	English

Summary

Chapter 1 Safety and Precautions

1.1 Safety Precautions

Covers safety measures for installation, wiring, power-on, operation, and repair.

Chapter 2 Product Information

2.3 Optional Parts and Maintenance

Chapter 3 Mechanical and Electric Installation

3.1 Mechanical Installation Guidelines

Covers installation environment, cooling, cover removal, and motor/transducer mounting.

3.2 Electrical Installation and Wiring

Chapter 4 Operation and Display

4.1 Operation Panel Interface

4.2 Function Code Management

4.4 Automatic Motor Parameter Tuning

Guides on the procedures for automatic motor parameter tuning for optimal control.

Chapter 6 Parameter Description

6.6 Group F1: Motor Parameters

Detailed description of essential parameters for configuring the servo motor.

6.7 Group F2: Control Parameters

Detailed description of parameters for tuning speed loop proportional gains and integration times.

Chapter 7 Servo Pump Commissioning Steps and Prototyping

7.2 Detailed Commissioning Steps

Chapter 8 EMC (Electromagnetic Compatibility)

Chapter 9 Failure Diagnosis and Solution

9.1 Fault Diagnosis Procedures

Provides systematic fault diagnosis and solution finding using warning/fault codes.

9.2 Common Faults and Resolutions

Details common faults, their potential causes, and corresponding troubleshooting steps.

Appendix 1 Common Parameters Table

1.3 Group F1: Motor Parameters

Essential parameters for configuring the servo motor type, power, and voltage.

1.4 Group F2: Control Parameters

Parameters for tuning speed loop proportional gains and integration times.