Inovance IS300T035-C User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300T035-C Specifications

General

Model	IS300T035-C
Type	Servo Drive
Rated Output Power	0.35 kW
Cooling Method	Natural cooling
Control Mode	Position, Speed, Torque
Communication Interface	RS-485, CAN
Communication Protocol	CANopen, Modbus
Feedback Type	Incremental Encoder, Absolute Encoder
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit
Control Method	Sinusoidal current vector control (SVC)

Summary

Chapter 1 Safety and Precautions

1.1 Safety precautions

Detailed safety precautions for operation and use.

1.2 Precautions

General precautions for motor and driver usage.

Chapter 2 Product Information

2.4 Technical Specifications

2.7 Routine Repair and Maintenance of Servo Driver

Guidelines for routine repair and maintenance of the servo driver.

Chapter 3 Mechanical and Electric Installation

3.1 Mechanical installation

3.2 Electrical Installation

Instructions for external electrical parts and wiring connections.

Chapter 4 Operation and Display

4.2 Description of Function Code Viewing and Modification Methods

4.6 Automatic Tuning of Motor Parameters

Chapter 5 Function Parameter Table

Chapter 6 Parameter Description and Solution

Chapter 7 Servo Pump Commissioning Steps and Prototyping of servo pump optional parts

7.1 Servo Pump Commissioning Process

7.2 Servo Pump Commissioning Steps

Chapter 8 EMC (Electromagnetic Compatibility)

Chapter 9 Failure Diagnosis and Solution

9.1 Failure Diagnosis and Solution

General approach to diagnosing and solving driver faults and errors.

9.2 Common Fault and Resolution

Common faults, their possible causes, and corresponding solutions.