Inovance IS300T030-C User Manual

i
Foreword
IS300 series servo driver is a servo driver which is specially desiged for Drive
permanent magnet synchronous servo motor (PMSM). IS300 series servo
driver has a wide capacity range（the rated current is 5A to 300A）.It’s able to
provide not only servo pump control, but also the general functional
requirements.And it is a high-power servo driver which is value-for-money in
the present market.
This manual is a guide to the operations of IS300 series servo driver.
This manual provides the user with related precautions and instructions for the
prototyping, installation, parameter setup, and on-site commissioning, and
routine repair and maintenance of servo driver. In order to use this series of
driver correctly, please read this manual carefully prior to operation and keep it
properly for future using. The supporting equipment customers shall distribute
this manual together with the equipment to the final users.
Unpacking and inspection:
Please confirm carefully when unpacking the box:
1) If the model and driver rated values on the nameplate are the same as
your order. The box contains the equipment, certificate of conformity,
user manual and warranty card.
2) If the product is damaged during the transportation. If there is any
omission or damage, please contact our company or the supplier
immediately.
First time use:
The users who use this product for the first time shall read this manual
carefully. For any doubt on certain functions and performances, please contact
the technical support personnel of our company for help so as to use this
product properly.
With commitment to the constant improvement of the servo driver, our
company may change the information provided without additional notice.

Inovance IS300T030-C Specifications

General

Brand	Inovance
Model	IS300T030-C
Category	Servo Drives
Language	English

Summary

Safety and Precautions

1.1 Safety precautions

General safety guidelines for operation and installation procedures.

1.2 Precautions

Specific precautions for motor insulation, thermal protection, and environmental factors.

Product Information

2.4 Technical Specifications

Comprehensive technical specifications of the servo driver, including frequency, control modes, and overload capacity.

2.7 Routine Repair and Maintenance of Servo Driver

Mechanical and Electric Installation

3.1 Mechanical installation

Guidelines for mechanical installation, including environmental conditions and mounting.

3.1.1 Installation environment

3.1.2 Cooling problem

Addresses cooling considerations during mechanical installation to ensure proper heat dissipation.

3.2 Electrical Installation

Guidance for the electrical installation of the servo driver, including external parts.

3.2.4 Main Circuit Terminals and Connections

Operation and Display

4.2 Description of Function Code Viewing and Modification Methods

Explanation of how to view and modify function codes using the three-level menu structure.

4.3 Shortcut Menu Operation Mode

4.6 Automatic Tuning of Motor Parameters

Procedures for automatic tuning of motor parameters to ensure optimal control performance.

Function Parameter Table

Group A0 Weak Magnetism and SVC Control Group

Group F2 Vector Control Parameters

Parameters for configuring vector control mode, including speed loop gains and integration times.

Parameter Description

Group F3 V/F Control Parameters

Parameters specific to V/F control, such as V/F curve setup and torque boost.

Group F4 Input Terminal

Group F6 Start/Stop Control

Group F9 Fault and Protection

Fault and protection parameters, including motor overload, stall, and transient stop settings.

Servo Pump Commissioning Steps and Prototyping of servo pump optional parts

7.1 Servo Pump Commissioning Process

A flowchart outlining the overall process for servo pump commissioning.

7.2 Servo Pump Commissioning Steps

Detailed steps for commissioning the servo pump, including motor and parameter setup.

7.2.1 Motor commissioning

Steps involved in motor commissioning, including parameter setting and automatic tuning.

7.2.2 Servo Pump Application Commissioning

Steps for commissioning the servo pump application, focusing on oil pressure control modes.

EMC (Electromagnetic Compatibility)

8.3 EMC Guide

Failure Diagnosis and Solution

9.1 Failure Diagnosis and Solution

Guide to diagnosing and resolving common faults and errors using warning information and fault codes.

Appendix 1: Common Parameters Table

Group A0 Weak magnetism and SVC control group

Group F1 Motor Parameters

Common motor parameters for driver configuration, including type, power, and current.

Group F2 Control Parameters

Common parameters for control, including speed loop gains and integration times.

Group F4 Input terminal